Enjoying the rain-sight from the side of a window is a sight to behold. But unfortunately, not everything gets along with the rain. A roof system, if not kept properly, can be severely damaged with a heavy rain-flow, causing a multitude of plumbing problems. Problems that appear minor on the surface but can cast long-term damage to your property, if not addressed in time.
To save yourself from such situations and find the best way to remain prepared is to schedule the timely visits of a roof plumber in Melbourne and stay intact with your beforehand arrangements. This way, you’ll be able to enjoy the rain view while staying relaxed from facing the unnecessary hassle caused by an inefficient roof system.
To further assist you on this, here are seven ways in which rain can damage your roof and how to prevent it from happening.
Table of Contents
1. Improper Venting –
Every house needs proper ventilation in its attic space in order to prevent moisture buildup that could lead to mold growth or rot. If your roof does not have enough venting, the moisture from the rain can accumulate and weaken the structure of your roof over time. To ensure this doesn’t happen, make sure there are enough air vents in your attic and that they are properly sealed off from the elements. If by any chance you missed installing the right ventilation system, don’t hesitate to consult a 24/7 emergency plumbing service immediately to avoid further damage.
2. Poor Drainage –
When it rains heavily, water will naturally collect on your roof, run down the slope towards the gutters, and drain around the edge of the house. If these gutters and drains are blocked or clogged with debris (such as leaves or twigs), then this water won’t be able to properly drain away from your roof, which can cause water leakage into your home’s interior or cause structural damage over time due to moss or algae growth on the surface of your roof tiles or shingles. Make sure you inspect your drainage system by calling an expert roof plumber in Melbourne.
3. Incorrectly Installed Flashing –
The flashing around chimneys, skylights, and other areas where two planes of a roof come together is a crucial element in keeping out rainwater as it prevents gaps between these planes that could allow water penetration into the house’s interior. If flashing is incorrectly installed or missing altogether, then you may find yourself dealing with leaks during heavy rains due to improper sealing around these areas. Make it a ritual to schedule the visit of your commercial plumber and get a professional check to correct flashing installation every few years to remain safe and stress-free!
4. Inadequate Insulation –
Insulation helps keep warm air inside during cold months, which keeps ice dams from forming along eaves troughs. However, during hot summer months, inadequate insulation will allow heat inside the home, which will lead to condensation buildup on colder surfaces such as windowsills and roofs, where it can cause blistering paint peeling and mold growth if left unchecked for too long! Make sure you have adequate insulation in all areas of your home throughout all seasons of the year so as not to end up with costly repairs down the road due to weather-related issues!
5. Blocked Gutters –
Gutters help direct rainwater away from vulnerable parts of your home like foundations, walls, etc., but if they become clogged with debris like leaves, twigs, etc., then their ability to do so is drastically reduced. This can cause flooding near foundations which could eventually lead to structural damage. So make sure you clean out gutters regularly by signing up for the guttering services in Melbourne and ensure proper functioning throughout to save yourself from unnecessary hassles.
6. Wind-driven Rains –
Heavy winds paired with torrential rains can cause water puddles along flat roofs. These puddles can seep through cracks into interiors, causing further damage. To ensure this doesn’t happen, install sloped roofs rather than flat ones whenever possible. Also, seal off any potential entry points for wind-driven rains, like gaps under doors, windows, etc.
7. Debris Accumulation–
Rainwater often carries debris onto roofs which, if left unchecked, can block vents, pipes, skylights, etc., eventually leading them to become clogged. Be sure to inspect roofs regularly for any debris accumulation so that it does not become a problem later on. For the best results, consider referring to 24-hours plumbing services that remain at your disposal for any plumbing hassle that appears unannounced.
Conclusion
The minor inconsistencies of the (cracks, leaks, rots, etc.) roof system can cost you heavily in terms of money and resources. It is important to find a timely solution to the underlying problem by calling a plumbing professional rather than relying on your temporary fixes.
Regular inspections and maintenance are crucial to avoiding any potential plumbing damages caused by rainfall. Following these seven tips, you should be able to protect your roof from rain damage! In case you are looking for expert resources, you can always rely on NLK Plumbing for proficient plumbing solutions. They are known for their professional expertise and vast experience to best cater to their clients for their diverse plumbing needs.
