Do you live in Lansdale, PA, and have problems with your heating system? If so, this guide is for you. In it, we will cover the 8 most common problems with heating systems in this area. Plus, we’ll provide solutions to help you fix them. So whether your heat isn’t working at all or it’s just not working very well, read on for help.
Table of Contents
1. The system isn’t working at all
If your heating system suddenly stops working, the first thing you should check is the power. Make sure that the unit is plugged in and that the breaker hasn’t been tripped. If everything looks good on the power front, then the problem may be with the thermostat. Try replacing the batteries to see if that does the trick. If not, you may need to call a professional for help. By also scheduling heating repair in Lansdale, PA, you can have the thermostat repaired or replaced.
2. The system isn’t blowing hot air
If your heating system is running but it’s not blowing hot air, there are several possible causes. First, check to make sure that the thermostat is set to “heat” mode and not “cool” or “off.” Next, check the air filter and replace it if it’s dirty. If the problem persists, there may be an issue with the furnace itself. Call a professional to take a look and make any necessary repairs.
3. The system isn’t blowing any air
If your heating system is running but not blowing any air at all, the first thing you should check is the furnace’s blower belt. If it’s loose or broken, that could be the problem. Another possible issue is a clogged air filter. Replacing the filter should fix the problem. If not, there may be something wrong with the motor or another component of the furnace.
4. The system is making strange noises
It could be due to a loose part or something else that’s come loose inside the unit. First, check for any loose panels or screws. If you find anything, tighten it up. If that doesn’t solve the problem, the issue may be with the blower belt. Try tightening or replacing it. If the noise doesn’t go away, there could be an issue with the furnace motor or another part.
5. The system isn’t blowing enough air
If your heating system is running but not blowing enough air, there are several possible causes. First, check to make sure all the vents in your home are open. If they’re not, that could be restricting the airflow. Next, check the air filter and replace it if it’s dirty. Finally, make sure that nothing is blocking the furnace itself. If the problem persists, there may be an issue with the furnace itself. Call a professional to take a look and make any necessary repairs.
6. The system is blowing air but it’s not hot
If your heating system is blowing air but it’s not hot, there are several possible causes. First, check the thermostat and make sure it’s set to “heat” mode. Next, check the air filter and replace it if it’s dirty. Finally, make sure that nothing is blocking the furnace. If the problem persists, there may be an issue with the furnace itself. If you have signed up for heating maintenance in Doylestown, PA, the technician can take a look and diagnose the issue.
7. The system is cycling on and off
If your heating system is cycling on and off more than usual, it could be due to a dirty air filter. Replacing the filter should solve the problem. If not, there may be an issue with the thermostat. Try replacing the batteries to see if that does the trick. If not, you may need to call a professional for help.
8. The system is running but the house isn’t getting warm
If your heating system is running but the house isn’t getting warm, there are several possible causes. First, check to make sure that all the vents in your home are open. If they’re not, that could be restricting the airflow. Next, check the air filter and replace it if it’s dirty. Finally, make sure that nothing is blocking the furnace itself. If the problem persists, there may be an issue with the furnace itself. Contact Bucks County Residential Heating & Cooling at (267) 691-0990 to schedule an appointment.
